Calmag Calglow 22mm Magnetic & Zinc Plate Scale Inhibitor
CalGlow is a totally unique scale inhibitor that combines two scale inhibiting technologies into one. The first technology is the use of a magnetic bar to induce a single polarity into the water. This causes the calcium and magnesium (limescale) particles to take on the same polarity. The particles then repel each other, and as a result prevent the formation of hard limescale. The second technology is the use of zinc plates which create the same reaction as the magnet. Once water passes over the plates and the inner copper body of the unit, a single polarity is induced into the water supply. This then stops the formation of hard limescale. In addition, the zinc plates slowly release minute particles into the water supply which prevents corrosion by removing all the air in the system
CalGlow can be fitted in two places. The first is on a central heating system to stop corrosion and the second is on hot or cold lines to prevent the formation of hard limescale.
CalGlow can be fitted to 22mm pipework and does not require earth bonding. The unit also comes with compression fittings. Once the unit has been installed you can sit back and relax as it will continue to work day and night without the need for regular maintenance.
CalMag comes with a lifetime guarantee on parts
After Installation you should notice the following effects
1. Any hard limescale that has formed around taps, sinks etc, will begin to soften with regular contact with treated water. This will make it much easier to clean.
2. Shower heads will be become descaled over time. Initially, showerheads may become blocked with loose limescale debris (often the case with electric showers). To solve this, simply remove the shower head and rinse out the debris.
3. After several months your hot water system will gradually become more efficient. Eventually you should be able to lower the water temperature and make considerable savings over the year.
Specifications:
- Length: 155mm (excluding fittings)
- Overall length: 192mm
- Diameter: 32mm
- Material: Plated Copper
- Fittings: 22mm Compression (STD)
- Maximum working pressure: 12 bar (168 psi)
- Maximum temperature: 100 degrees centigrade
- Maximum flow rate: 1.08l/sec (14 gpm)
Economical to operate | Water remains potable |
No maintenance | Easy to install |
Competitive initial cost | Stops hard scale forming |
No chemicals used |
